The primary purpose of this course is to teach you how to design basic analog electronic circuits for connecting one device to another properly and efficiently: this is generally the function of most lab-built electronic circuits.
Along the way, we will also learn how to do basic analog circuit design and to a lesser extent signal acquisition and detection. More specifically, you will learn about the following essential concepts:
You will also learn to use the following components and equipment:
There is no official textbook for the course. I will be posting introductory chapters and laboratories created specifically for the course on my website before the lecture. These chapters and labs were originally created by Prof. Jeff Nelson, Prof. Bill Cooke and Prof. Seth Aubin. They have been adapted to the current course. While there are many good electronics textbooks, I would use the following two:
Both books will be useful for the Digital Electronics class in the next semester.
The class hours are divided into two parts: Lecture and Lab. The lecture will be on Monday 1:00-1:50 pm in the Small 223, and will cover the concepts to be tested in the lab later in the week. The lab portion of the class will be held on Wednesday 2:00-4:50 pm for Physics 252-01 and Thursday for Physics 252-02 in the Small 230.
Your final grade for the course will be determined from the following grading weight distribution:
Your lab book should be a regular style notebook without rings with either line or quadrangle ruling or a computation logbook. It can be obtained at most stationary stores (i.e. Staples, etc ...)
Your lab book is the primary record of your work and data. You should record everything that you do in the lab book, so that anyone (such as the instructors and yourself) can understand what you have done and measured. You should include circuit diagrams, observations, questions, answers, design considerations, measurement data, and analysis. Diagrams, data, graphs, and other notes on separate pieces of paper should be glued, taped, or stapled into the lab book. If something falls out of the lab book during reading/shaking/transporting, it is not the part of the log book and will be discarded. All notes should be written in pen. Mistakes and errors in design, data, and analysis will occur, and they should be crossed out neatly.
The lab book will be graded primarily on completeness and to a lesser extent on neatness (i.e. better to be complete than neat, though doing both is better yet). It should also feature a table of contents. The lab books will be turned in every week or two and returned before the next lab.
You should enter you lab notes and data directly into the lab book. A "scratch" lab book that is neatly copied into the lab book at a later time is not appropriate and will result in a significantly reduced grade. It is OK though to use scratch paper which is glued into the lab book prior submission.
Most labs will include a design component. The design exercises must be prepared prior to attending a lab. Their main goal is to prepare you for the labs. I will check preparation of the design exercise at the beginning of each lab. An unprepared/incomplete design exercise will have up to 50% penalty.
There will be 15 minutes quizzes at the beginning of a lab to encourage you to review concepts and circuit design.
| Grade | Score percentage | Grade | Score percentage | Grade | Score percentage |
|---|---|---|---|---|---|
| A | 94-100 | A- | 90-93 | ||
| B+ | 87-89 | B | 84-86 | B- | 80-83 |
| C+ | 77-79 | C | 74-76 | C- | 70-73 |
| D+ | 67-69 | D | 64-66 | D- | 60-63 |
| F | <60 |
There will a 1 hour midterm test in lab on February 22-23. There will be a lab session after the midterm.
There will be a final exam on Tuesday May 1 (2:00pm - 5:00pm) covering all course materials.
Lab books are due by 5pm on next day after lab (i.e. Thursdays for the Wednesday section and Fridays for the Thursday section) and will be returned by the next lecture.
Late logbook submissions will have points deducted. If you know you will have a problem getting the report on time, please, send me an email as soon as you can to let me know about your situation.
Please notify the instructor if you are ill, so that arrangements can be made to make up missed labs.
| Week 0: 1/15 | NO CLASS |
| Week 1: 1/22 | DC Circuits Basics. |
| Week 2: 1/29 | Kirchhoff's Law's and Thevenin's Theorem. |
| Week 3: 2/05 | Capacitors, Inductors, and Complex Impedance. |
| Week 4: 2/12 | Passive Filters and Transmission Lines |
| Week 5: 2/19 | Diodes. MIDTERM TEST during labs time |
| Week 6: 2/26 | Transistors 1: BJTs |
| Spring Break | NO CLASS |
| Week 7: 3/11 | Transistors 2: More BJTs |
| Week 8: 3/18 | Transistors 3: FETs |
| Week 9: 3/25 | Op-Amps 1: Introduction to Op-Amps |
| Week 10: 4/01 | Op-Amps 2: detectors, filters, power amplifiers |
| Week 11: 4/08 | PID Control Theory |
| Week 12: 4/15 | Electronic Circuit Design Tools |
| Week 13: 4/22 | Comparators |
| Week 14: 5/01 | FINAL EXAM Tuesday May 1, 14:00-17:00 |